Use and Maintenance of Greenhouse Roller

Use instructions

After the installation and debugging are completed, the specific operating instructions are as follows:

1. From the bottom up, roll the reverse switch to the forward position. When the roller blind reaches the predetermined position, switch the reverse switch back to the middle position.

2. When placing the curtain from top to bottom, turn the reverse switch to the inverted position. When the curtain is placed at the predetermined position, switch the reverse switch back to the middle position.

3. In case of power failure, cut off the power first, then insert the handle into the handlebar jack and shake manually. Shake up the roller blind clockwise and counterclockwise to move down the curtain.

Repair and maintenance

1. The maintenance of the shutter must be carried out when the roller blind is placed in the lower limit position. Care should be taken to cut off the power supply first. When it is really necessary to repair the greenhouse, it is strictly prohibited to send power to the roller blind to hurt people.

2. During use, it is necessary to check the tightening of bolts at various connection points at any time to avoid safety accidents due to loosening or non-compliance of materials.

3. After the machine is used up, it can be rolled up to the upper limit and the host can be covered with plastic film. If you remove it and store it, wipe it clean and put it in a dry place.

4. The shutter shall be inspected and maintained once a year before use. The main contents of the inspection shall include the state of the main engine; the tightening bolt must be tightened and loosened; the roller blind shaft shall be subject to damage and bending deformation; Reinforcement and maintenance.

Brown Flower Shiitake Mushroom

Dride Brown Flower Shiitake Mushroom,Brown Flower Shaped Mushroom,Lentinula Edodes,Lentinus Edodes

SHANDONG JOIN & SHARE AGRICULTURAL DEVELOPMENT CO., LTD , https://www.joinsharemushroom.com