CT scanner captures high-resolution 3D photos

CT scanner captures high-resolution 3D photos The CT scanner is a full-featured disease detection instrument, which is referred to as a computerized tomography scan technique. Recently, scientists used a CT scanner to take a series of high-resolution 3D photos and recorded the process of the growth of the small red dragonfly butterfly from centipede to adult body. The CT scan took 200 X-rays and recorded the growth process of the chrysalis and the process of the final destruction of the butterfly.

The CT scanner is a full-featured disease detection instrument, which is referred to as a computerized tomography scan technique. Based on the difference in absorption and transmittance of X-rays from different tissues of the human body, the instrument is used to measure the human body with highly sensitive instruments, and then the measured data is input into the electronic computer. After the data is processed by the electronic computer, it can be photographed. The cross-section or the three-dimensional image of the examined part of the human body was found, and small lesions were found in any part of the body.

Recently, scientists used a CT scanner to take a series of high-resolution 3D photos and recorded the process of the growth of the small red dragonfly butterfly from centipede to adult body. The team scanned the little red dragonfly, each 5 mm in length, hanging in a straw and slowly spinning. The CT scan took 200 X-rays and recorded the growth process of the chrysalis and the process of the final destruction of the butterfly.

Scientists pointed out that this study can be used to observe how insecticides affect the development of bees, so they are very valuable for research.

Vtm Test Kit

The generic name of VTM Virus Sampling Tube is a single-use virus sampling tube, which is generally used for the detection and sampling of infectious pathogenic microorganisms in disease control departments and clinical departments. It is suitable for detection and sampling of influenza viruses (including general influenza, highly pathogenic viruses, H1N1 influenza virus, etc.), hand, foot and mouth virus, new coronavirus, measles and rubella and other types of viruses. VTM virus sampling tube can also be used for detection and sampling of Mycoplasma, Chlamydia and Ureaplasma urealyticum.

The virus and related samples in the VTM virus sampling tube should be stored and transported within 48 hours in a refrigerated state (2-8°C). Viruses and related samples can be stored for a long time in -80℃ environment or liquid nitrogen environment. The virus can maintain the activity of the virus in a lower temperature range, reduce the speed of virus decomposition, and improve the positive rate of virus isolation.

The VTM virus sampling tube is generally equipped with a disposable flocking swab. From the appearance point of view, the flocking swab is white and soft. Using this soft brush during the sampling process will make the user feel no foreign body, and it is suitable for different Partial sampling person. Moreover, the flocking swab is designed with a breaking point that conforms to the length of the sampling tube and the natural orifice of the human body, which is not only convenient for sampling but also convenient for transportation of the specimen.

Biomed Vtm Kit,Vtm Test Kit,Saliva Collection Tube,Virus Sample Collection Tube

Jilin Sinoscience Technology Co. LTD , https://www.jlgkscience.com