Tractor front axle maintenance
After the tractor's front drive axle is used for a long time, it should be repaired and maintained in time. With proper maintenance, it can avoid or reduce the occurrence of some faults, reduce the failure rate, and also reduce the wear of the parts, thus prolonging the service life of the tractor. In the actual operation, the front axle wheel reduction mechanism appears relatively more failures, and it is relatively more necessary to strengthen maintenance. The following takes the kintra series front axle produced by One Trailer (Luoyang) KaiChuang Technology Co., Ltd. as an example to introduce the maintenance method of the wheel speed reduction mechanism. First of all, the drive axle must be put into use after grinding and trial operation. The running-in of the running-in should be carried out according to the requirements of the running-in of the whole machine, such as empty running of the vehicle and load running-in. It takes about 60 hours for general run-in. After the shutdown is completed, the lubricant in the drive axle is released while hot, and the appropriate amount of kerosene or light diesel oil is added for cleaning (together with the entire drive system). After the cleaning fluid is discharged, new lubricant is added. In daily maintenance, the axle should always check the wheel speed reduction mechanism. The color and viscosity of the lubricant can be observed through the wheel oiling hole. If the lubricant is found to be deteriorated, it should be replaced in time. Specific oil inspection method: The vehicle is running slowly, so that the wheel oil volume is in a horizontal position, open and add oil outlets, and the normal oil level should be level with the drain port. When the oil is lacking, add the same type of lubricant. The problem of gaps in the wheel speed reduction mechanism should be adjusted in time. The adjustment method is as follows: 1. Park the vehicle on a level road surface. After the flame is turned off, stop the wheel with a stopper before and after the wheel to prevent the vehicle from sliding. At the same time, disengage the front drive handle. 2. Use jacks to lift the vehicle, after reliable support with the studs, turn the wheel and check the swing clearance of the wheel hub. The small clearance does not need to adjust the wheel bearing clearance, only ordinary maintenance, cleaning the wheel oil pool, and replace the oil . When the sloshing clearance is large (>1.0mm), disassemble the wheel for further adjustment. 3. With both hands, turn the hub so that the drain port releases lubricant; then remove the planet carrier. 4. After opening the locking nut against loosening. 5. Continue tightening the nut clockwise to remove the wheel bearing clearance and relock the nut's loose lock.
We are the supplier of high quality 100% recycled fabric Change Robe, waterproof change robe, long sleeve Adult Change Robe. Warm Change robe.
Waterproof Dry robe features:
1. 100% waterproof
2. High quality 100% recycled nylon fabric
3. big change space
4. YKK Zip
Sample with customized design and logo are available.
Welcome to discuss the details.
Waterproof Change Robe,Waterproof Change Robe,Surfing Change Robe,Swimming Change Robe Suzhou Golden Gamrnet MFG Co.,Ltd , https://www.svchangerobe.com