Mineral water production equipment operation notes

As the concept of healthy drinking water slowly enters people's lives, the process of producing mineral water in water plants is strict. In this regard, Sanxing Kangzhihui Beverage Machinery Factory of Jinfeng Town , Zhangjiagang City combines many years of work experience to sort out the production of mineral water. The operation precautions of the equipment, I hope to help.

If the mineral water production equipment adopts manual operation, it is necessary to pay attention to two problems. One is the failure, and the other is the equipment debugging problem. The manual operation procedure must first turn on the power, then turn off the air switch on the equipment host, and the power indicator lights up to prove The device is in the startup state. Second, check that all valves, including the raw water inlet valve, are fully open. Open the water inlet device inlet switch to operate with the inlet solenoid valve and the original water valve. After 5 seconds, the first water switch is turned on, the first stage high pressure pump is started, and after 3 seconds, the secondary water switch is turned on to start the secondary high pressure pump.

In order to save various costs in the production process, modern mineral water plants recommend the use of highly automated equipment. The automatic operation of the equipment is to first turn on the power, and then check the various valve switches. The water purifying device can be automatically turned on and the device is automatically operated, and the degree of intelligence is high. Start the original water pump of the equipment, so that the raw water enters the pretreatment system, and the water is automatically turned on when the water is used to the low water level to realize the automatic operation function of the equipment.

In the operation of the process production process, the mineral water production equipment operator provides a fully automated solution with diagnostic functions (stage monitoring). With the operation dialog, you can control and observe all production parameters. The parameters of each production stage can appear in sequence on the display of the central control room.