Detailed description of the classification and use range of the crusher
Introduction The external forces applied to the material during the pulverization process include crushing, shearing, impact striking, and grinding. Rolling is mainly used in coarse and medium crushing. It is suitable for crushing and shearing of hard materials and large blocks. It is mainly used for crushing or crushing crushing impacts suitable for tough or fibrous materials. It is mainly used for crushing and depolymerizing materials suitable for brittle materials. The pulverization grinding is mainly performed in ultrafine pulverization and ultrafine pulverization for ultrafine pulverization after medium-fine pulverization. Main classification The pulverizer is a machine that pulverizes large-sized solid raw materials to the required size. The pulverizer can be classified into a coarse crusher , a pulverizer , and an ultrafine pulverizer depending on the size of the scraped or shredded material. According to the D90 standard of the required material fineness, 90% of the material reaches a predetermined fineness, and the pulverizer can be divided into a crusher of 60 mesh or less, a pulverizer of 60-120 mesh, an ultrafine pulverizer of 120-300 mesh, and an ultrafine pulverizer 300. Above the target. Scope of use The coarse crusher is mainly used for crushing pretreatment operations in various industries. Its main function is to process 5-10cm of larger diameter material to a smaller diameter granular material with a diameter of 5-10mm. The pulverizer is mainly used for medium-to-fine pulverization operations in various industries. The function of the pulverizer is to process the granulated material to a medium-fine powder of a desired diameter for subsequent processing or as a finished product. The ultrafine pulverizer is mainly used for the ultrafine pulverization of most industries. The material after pulverization is pulverized again to achieve the required material diameter, which is mainly used for the processing of raw materials for high-end products. Large-scale pulverizers with high output under the premise of the same pulverization fineness are mainly suitable for crushing and processing of mineral products in metallurgy, building materials, chemical industry, mining, highway construction, water conservancy and hydropower, refractory materials, steel and other industries. The equipment with low output under the premise of the same crushing fineness of the small crusher is mainly suitable for material crushing treatment in food, chemical, pharmaceutical, greening, sanitation, and other industries. Brama Brama fillet skinless Brama Brama Skinless,Frozen Brama Skinless,Brama Brama Fillet Skinless,Fresh Frozen Brama Skinless Zhoushan Junwei Aquatic Products Co., Ltd. , https://www.junweiaquatic-intl.com