Several important points to pay attention to effectively maintain the cooked vacuum packaging machine!

The cooked vacuum packaging machine is a widely used vacuum packaging machine. The chamber vacuum packaging machine is suitable for packaging items, and the conveyor belt vacuum packaging machine can be applied, such as fruits, vegetables, pickles, grain, fresh meat fish and Meat products, condiments, tea, coffee, native products, Chinese herbal medicines, chemicals, electronic components, textiles, mechanical parts, precision instruments, instruments, etc., whether solid, powder, paste or liquid juice can be packaged, More suitable for items with liquid juice.
1. The vacuum packaging machine should be used in an environment where the temperature is -10 °C - 50 °C, the relative humidity is not more than 85%, there is no corrosive gas in the surrounding air, no dust, no explosion hazard.
2. Ensure that the vacuum pump works normally for the vacuum packaging machine, and the vacuum pump motor is not allowed to reverse. The oil level should be checked frequently. The normal oil level is 1/2-3/4 of the oil window (cannot be exceeded). When there is moisture in the vacuum pump or the color of the oil turns black, the new oil should be replaced at this time (usually one or two consecutive work) Change once a month, use 1# vacuum gasoline or 30# gasoline, oil can also be).
3, the impurity filter should be frequently removed and washed (usually once every 1-2 months, such as packaging debris should shorten the cleaning time).
4. For 2-3 months of continuous operation, the rear cover 30 should be opened to add lubrication to the sliding parts and the switch bumps. The connection activities on the heating rods should be lubricated according to the usage.
5. Check the decompression, filtration and oil mist triplets 24 frequently to ensure oil mist (sewing machine oil) in the oil mist and oil cup, and no water in the filter cup.
6. The heating strip and the silicone strip should be kept clean and free from foreign matter, so as not to affect the quality of the seal.
7. On the heating rod, the two-layer adhesive under the heating sheet will be insulated, and should be replaced in time when there is damage, so as to avoid short circuit.
8. The user has self-prepared working air source and inflatable gas source. The working pressure of the vacuum packaging machine has been set to 0.3 MPa, which is more suitable. Do not adjust too much without special circumstances.
9. The vacuum packaging machine is not allowed to be placed and impacted during the handling process, and it cannot be carried over.
10. The vacuum packaging machine must have a reliable grounding device when it is installed.
11. It is strictly forbidden to put your hand under the heating rod to prevent injury and immediately cut off the power in case of emergency.
12. When working, first ventilate and then energize. When the machine is shut down, first cut off the electricity and then cut off the gas.

Explosive / Liquid Detector

Explosive / Liquid Detector ,Liquid Detector ,Explosive Detector ,Liquid Detection Indicator

Shenzhen Unisec Technology Co.,ltd , https://www.uniqscansecurity.com