Installation of quartz automatic double distilled water

Installation of quartz automatic double distilled water
Quartz automatic double distilled water has not entered our field of vision for a long time, but with the wider application of the market, its application fields are also very much. It has applications in schools, medical, scientific research, petrochemical, etc., and its operation is simple. Safe to use, beautiful appearance, high water purity, well received by all units. Because everyone has less contact, there will be some doubts about the use and installation. I will give you a brief explanation below.
Installation method of quartz automatic double distilled water:
1. Open the box, remove the cold tube, and insert one end of the sanding port into the bottom horizontal flask in sequence.
2. Connect the rubber tube with reference to the schematic. The top cover can be covered or not (preferably covered). The water nozzle is slanted from the upper left side and slowly placed on the instrument.
3. Connect the cold suspected pipe outlet pipe (the inner group) to the connected olefin barrel. (Note: the round hole will introduce rubber into the barrel)
Way of working:
4. Turn on the electric front water inlet valve to be introduced into the water inlet of a horizontal flask, and let it flow into the flask. The water level is half-filled until there is water in the overflow; the other is led to the water tank. .
5. Plug in the power, turn on the electric switch No. 1, and the work indicator light is on, indicating that one flask starts to work, and a steamed water flows into the electric No. 2 flask to a certain water level (about
One hour) Turn on the two cold water inlet valve, wait for the water outlet to flow out and then turn on the power supply to start the distillation.
Quartz automatic double distilled water cleaning method:
The working time of the device is long, and scale is generated. The scale can be poured into the scale of the horizontal flask with 20% nitric acid. Soak for four hours and drain from the drain. Rinse with tap water, rinse three times and rinse with ionized water three times.
Maintenance and maintenance of quartz automatic double distilled water:
6. In case of water or power failure during daily work, please turn off the power at any time to avoid damage to the instrument and its service life.
7. For a long time of work, the electric heating wire will age, and it is necessary to check regularly whether it needs to be replaced. Whenever the power is turned on, a bright spot is found to indicate that the wire is broken.
Replace it in time. Don't wait when you are completely disconnected.
8. To replace the electric heating wire, pull the heating wire to a certain length (depending on the length of the electric heating tube), and insert it through the electric heating tube until it is returned and then straighten the two ends to about 5CM, then insert the magnetic joint, and now tighten. Until it is not loose.
Before using and using quartz automatic double distilled water , you must pay attention to proper operation and maintenance, and should pay attention to protect the instrument from impact. Because the distilled water is made of all-quartz glass, it is easy to break and develop. Regular maintenance of the equipment, so that the equipment can work better for us.
For more information you can also visit: http:// Http://

Freeze-dried Half Of Fruit

Freeze-drying powder process includes: fresh fruit selection - cleaning - cutting - blanching - cooling - drying - grinding beating - gel grinding - sterilization - pre-freezing - vacuum freeze-drying - ultra-fine grinding - weighing packaging - testing - finished product.



Firstly, fresh and mature fruits with good quality were selected in the pre-treatment area of the food lyophilizer, and the leaves were removed to remove impurities. Then, preliminary cleaning and simultaneous sterilization of fruit surface were carried out. After sterilization, the fruits were cleaned and drained again. After the drain, the fruit is sliced and treated by blanching process. After the color preservation, the fruit is treated by pulping, and then pasteurized. The pretreatment process is finished before lyophilization.



The processing core of freeze-drying powder is the equipment area of food freeze-drying machine. After pre-treatment, the fruit enters the equipment of food freeze-drying machine and crystallizes into a solid state at low temperature, and then sublimates and dries in a vacuum environment to obtain freeze-drying products with little water content. Freeze-dried products out of the warehouse into the food freeze-dried post-processing area, ultrafine grinding, and then according to the need to do weighing packaging, after testing the finished products packed into storage.

Raspberries

Freeze-Dried Half Of Fruit,Mulberry Fruit Powder,Freeze Orange Powder,Raspberry Freeze Dried Powder

Shaanxi HuiKe Botanical Development Co.,Ltd , https://www.oasis-hk.com