Water bath use and precautions
(1) Close the drain valve and inject the water into the water bath to the appropriate depth. The water bath should be placed on a level surface. (2) Insert the power plug into the three-eye socket, and the middle eye should be effectively grounded. (3) Adjust the thermostat knob clockwise to the appropriate position. (4) Turn on the power switch, turn on the power, and the red light is on, indicating that the furnace wire is energized and heated. At this time, if the red light is not bright, adjust the temperature adjustment knob. If the red light is still not lit, check the circuit for any problems. (5) After the furnace wire is heated, the index value of the thermometer rises to 2 °C from the control temperature, and the temperature adjustment knob is turned in the reverse direction until the red light is extinguished. After that, the red light is intermittently turned off, indicating that the controller is functioning. At this time, the temperature adjustment knob can be adjusted slightly to reach a constant temperature. (6) Do not splash water into the electrical box to avoid leakage and damage to electrical components. (7) Keep the water tank clean and wash regularly. The water should be replaced frequently. If it is not used for a long time, drain the water and dry the oven to avoid rust. (8) The electric water bath must be connected to the ground wire. Always check the water bath for leaks. Shangyu Xingxing Instrument Equipment Co., Ltd. is located in Daoxu Town, Shangyu District, Shaoxing City, Zhejiang Province. It is an enterprise integrating production, product research and development, processing and trade. The company's main products: drying box series, incubator series, laboratory muffle furnace series, distilled water series, as well as clean workbench, air shower, fume hood, biological safety cabinet and other complete purification equipment. The company has a strong technical research and development team, a strong after-sales guarantee service system, is the linger of the Chinese laboratory complete sets of equipment manufacturers, welcome customers to buy. Removable Oxygen Cylinder Filling System
Removable Oxygen Cylinder Filling System
Compressed air is purified through the air dryer and filters to a certain level for main plant to work with. Air buffer is incorporated for smooth supply of compressed air thus to reduce fluctuation of compressed air source. The plant produces oxygen with PSA (pressure swing adsorption) technology, which is a time proven oxygen generation method. Oxygen of desired purity at 93%±3% is delivered to oxygen buffer tank for smooth supply of product gas. Oxygen in buffer tank is maintained at 4bar pressure and fill in cylinder with an oxygen booster and compress the oxygen purity to 150bar.
With a customized container, all the parts can be involved in, and removable with a vehicle.
Removable Oxygen Cylinder Filling System,Oxygen For Cylinder Filling,Oxygen Refilling,Oxygen Bottle Refilling Plant Hunan Eter Medical Co., Ltd. , https://www.eter-tech.com
