How to ensure the normal operation of the biochemical incubator?
Biochemical incubators can be widely used in cryostat tests, culture tests, condition tests, and the like. In order to ensure that it can run normally when used, you should pay attention to the following points: Firstly, the angle between the inside and the surface of the box should not be less than 60 ° when loading and unloading ; when the operating temperature is low, there will be condensed water in the incubator, and the drain in the drain pan at the bottom of the tank should be drained from time to time; The beauty of the facility shall not be wiped with acid or alkali and other corrosive objects. The cabinet can be dried with a dry cloth for a while; the room should be kept dry and well ventilated, and the relative humidity should be kept at around 85%. Corrosive gas is present to prevent direct sunlight from shining on the incubator; in addition, the biochemical incubator should be separated by more than 10cm from the surrounding area to ensure good cooling of the refrigeration system ; after Zui, it must be noted that the water source must have a reliable antenna to ensure The incubator antenna is in firm contact with the antenna of the network power supply to prevent leakage or damage caused by the power supply of the network. When the incubator is running, the power plug should be unplugged.
In
a hydroponic system, plants are placed in nutrient-enriched water. Mediums such
as gravels, sand or vermiculite can also be used. Thus plants which are placed
in the water absorb the nutrients very easly. When the nutrients from the water
starts finishing , water is recycled or additional nutrients are added.
Greenhouse Garden Hydroponics,Hydroponic Garden,Hydroponic Greenhouse JIANGSU SKYPLAN GREENHOUSE TECHNOLOGY CO.,LTD , https://www.greenhousehydroponic.com