How to use vacuum packaging equipment correctly
Gauze Roll,Gauze Bandage Roll,Sterile Gauze Roll,Sterile Bandage Roll Henan Anbang Medical Supplies Co., Ltd. , https://www.anbangmedical.com
1. The vacuum packaging machine is placed smoothly, check whether the cover is smooth, and automatically jump after the hand is released.
2. Equipped with power supply that meets the requirements of the model.
3. Check whether the position of the vacuum pump oil surface of the vacuum packaging equipment is correct. If it is not correct, adjust it (see the instruction manual of the vacuum pump for details).
4. Ground the unit well.
5. Turn on the power, turn on the power switch, and close the cover to see if the vacuum pump is running normally.
Adjustment before use:
1. Select vacuum degree vacuum packaging machine pumping time, digital display, continuous adjustable, small vacuum packaging machine pumping time is digital rotation type 0-30 seconds adjustable. Adjust the length of the pumping time to achieve the required vacuum.
2. Select the heating temperature and select the required heating temperature according to the material of the packaging bag, and adjust the heating temperature knob to the corresponding position.
3. Adjust the heating time heating time, digital display, continuously adjustable, adjust the heating time knob according to the packaging materials and heating temperature used, and choose the appropriate heating time.
4. Select the silicone word of the sealing silicone rubber strip according to the need, and set the sealing date and other characters.
Precautions when using:
1. Turn on the power switch.
2. Open the bag of the package and put the package into the work room. Place the seal on the silicone rubber strip. Do not overlap the bag. Turn over the bag and press the bag. it is good.
3. Press the upper part of the cover (or press the edge of the upper cover) to close the cover. The machine will automatically complete the vacuum packaging process according to the program and automatically open the cover. Some equipments are equipped with an emergency stop switch.
4. Open the vacuum cover and take out the packaging bag to complete a working cycle.
5. Turn off the power switch and unplug the power plug when stopping work.
Always use the vacuum packaging machine as required!