The reason why the ultra-pure water meter slows down
In different fields, we often have different requirements for water quality , and the water produced by ultrapure water equipment does not contain any impurities, which meets the water demand of various industries. Under normal circumstances, after using ultra-pure water equipment for a period of time, we will find that the water production will be slower. Many customers are more confusing. Today we will introduce the reasons for the slow water production of ultra-pure water equipment. Several situations: 1, membrane blockage The pre-filter filter element does not change or clean for a long time, which causes the water quality inside the machine to be far worse than the water quality before entering the machine. The raw water quality is poor, and the proportion of the wastewater is small, which causes the plugging of the waste water solenoid valve or the flushing combined valve, so that no waste water or little waste water is discharged, which leads to clogging of the membrane and shortened service life. 2, the transformer is faulty The transformer is faulty and cannot provide the voltage required for the normal pressurization of the pump. The speed is slow, the increased pressure is small, and the boost is small. Naturally, the pressure required for the tap water to pass through the RO membrane is not reached. At this time, the water production is slow. After eliminating the main factors such as pump factors and membrane factors that affect the slow water production, it is necessary to try a new transformer. Â Â Â Â 3, check valve blockage Sometimes the check valve will be blocked, although this happens very rarely, but when we check, we can take the check valve and see the amount of water. If there is a significant change in the amount of water after and after the removal, it means that it is really blocked. 4, filter plugging One of the common faults of the device zui is that the filter element is clogged. Now the secondary pollution of tap water is getting more and more serious. If you catch up with the maintenance pipeline, the filter element will not be blocked. Due to the lack of special maintenance in the community, the filter element is rarely replaced, so the blockage is very common. Replacing the filter element is very important to extend the life of the unit. 5, the pump is small, the pump loses pressure The pump has a small boost, which usually occurs in equipment with a service life of more than two years, or equipment that has been in working for a long time. The pump loses pressure and is generally not easy to find. The direct performance is that the membrane has less water or the membrane does not produce water, and is often mistaken for membrane blockage. Ultra-pure water equipment is usually caused by these factors if the water production slows down. You can also find out the reasons for the drop in water production of ultra-pure water equipment. When using it, pay more attention to these factors and you can avoid this. Kind of situation. Freeze-dried powder is a sterile powder injection obtained by freezing the liquid medicine into a solid state in a sterile environment, and subliming and drying the water in a vacuum. Freeze-dried powder is composed of a bottle of high-purity and high-active biological protein freeze-dried powder and a high-purity liquid essence. When using, it needs to be connected with a patented vacuum to reconstitute the freeze-dried powder and the essence to activate the biological protein activity. Freeze Dried Fruit Powder,Strawberry Powder,Freeze Dried Powder,Raspberry Powder YT(Xi'an) Biochem Co., Ltd. , https://www.ytlinkherb.com