What are the reasons for the uneven sealing of the vacuum packaging machine?

In the process of using the vacuum packaging machine, if the seal is uneven or there are many wrinkles, how can I solve it? This article is to introduce you to several reasons and solutions for this situation:

1. The insulation cloth wrinkles, as a vulnerable part of the vacuum packaging machine, the insulation cloth should be replaced after a period of use.

2. The silicone strip or steel box is offset, as long as the adjustment is fixed to the original position.

3. The gap between the heating strip and the silicone strip is too large to be completely sealed. The solution is very simple as long as it is adjusted to the proper position.

4. The heating time and heating temperature setting are unreasonable. If the time is too short, the sealing will not be good. If the temperature is too high, the problem will occur this week. Adjust the appropriate temperature time according to the material and thickness of the packaging bag. A beautiful and sturdy mouth.

The above are some of the reasons and solutions for the small series. If there are any problems, you can consult me ​​and we will communicate together.