Rotary cultivator's correct use
Blade installation 1. Regular operation. The left and right machete cross-mounted on the entire knife shaft. This arrangement method is flat after cultivation and suitable for flat work. 2. Rotary tillage and trenching operations. Starting from the middle of the cutter shaft, turn the left machetes fully to the left and install the right machetes to the right, with one exception at each end; install one piece of left and right blades in the middle of the knife holder to make the soil pieces thrown in the groove. Side, forming a shallow ditch. 3. Plowing work. Starting from the middle of the cutter shaft, the left machete is fully mounted to the left, and the left machete is installed to the right. Each blade of the left and right blades is mounted on the middle blade holder. When the machine crosses the ditch, the soil is thrown into the ditch. Ditching effect. Rotary tiller adjustment Before the tractor starts, the rotary cultivator clutch handle should be set to the disengaged position. 1. Left and right level adjustments. Lower the rotavator and bring the tip of the knife close to the ground to see if the left and right tip heights are the same. If not, adjust the right suspension bar so that the cultivator is level to the left and right to ensure the same depth. 2. Adjust horizontally before and after. When the required depth is required, see if the propeller shaft is horizontal or not, and if the angle is the same, or if the gearbox is horizontal, use the pull-rod to adjust the front and rear levels to ensure that the propeller shaft works well. 3. Increase height adjustment. In order to ensure that the tilt angle of the drive shaft does not exceed 25 degrees, the rotary cultivator should not be raised too high. When working in the field, it is only necessary to raise the blade tip to 20 cm from the ground, and tighten the limit with a screw on the position adjustment handle. ensure safety.
Acne Patch5
The main material of acne pimpel patch is hydrocolloid, which is composed of hydroxymethyl cellulose, medical hot melt adhesive. Acne patch box is used to apply to the surface of acne, absorbing tissue secretions in a physical way and creating a moisture-balanced environment around the acne. Acne patch kingson has a flat back and neat edges, with no defects of decoupling. Cute acne patches can absorb more than twice of its own tissue fluid. Private label acne patch is disposable. Keep skin clean before product use, do not apply any products, do not use with ointment. Hydrocolloid acne pimple patch for zits is most effectively absorbed when the acne appears pus-filled. To use rael acne pimple healing patch, remove the sticker, peel off the backing paper, apply it to the wound and gently press around it to fix it. Acne patches korean is most effectively absorbed when the acne appears pus-filled. To use acne healing patches, remove the sticker, peel off the backing paper, apply it to the wound and gently press around it to fix it. After the color of the acne patch organic changes from clear to white, replace the sticker. Cosrx acne pimple patch has good water resistance and can be used during makeup or bathing.
Hydrocolloid application,acne pimple patch,lz pimple acne patch,acne patch salicylic Henan Maidingkang Medical Technology Co.,Ltd , https://www.mdkmedical.com