The main points of use of the basket type tablet press series
Tattoo Sterilizer,Autoclave Tattoo,Tattoo Sterilizer Machine,Tattoo Sterilization Equipment ZHEJIANG FOMOS MEDICAL TECHNOLOGY CO.,LTD. , https://www.ifomos.com
The basket type tablet press is a one-way tablet based on manual stamping, that is, the undershoot is fixed when the tablet is pressed, and only the punching motion is pressurized, and the granular material is pressed into a tablet machine by the pressing wheel, and there is automatic Adjusting pressure, controlling the weight of the film, eliminating the waste film, printing the data, displaying the fault shutdown, etc., in addition to controlling the difference in the weight of the film within a certain range, the quality problems such as the missing angle and the loose piece can be automatically identified and eliminated.
The range of flower basket presses is also wider and wider. It is no longer limited to suppressing Chinese and Western medicine tablets. It can also widely suppress health foods. It has automatic control of tablet weight, pressure, automatic film, and automatic rejection. Features such as tablets.
The operation mechanism of the basket type tableting machine is as follows: the rotating pulley is rotated to raise the lower punch to the high position of the zui, the screws on both sides of the adjusting nut are loosened, and the adjusting nut is rotated to make the upper end surface and the middle end face of the lower punch. After flushing, adjust the screws on both sides so that the front end of the feeder is close to the edge of the outer diameter of the lower punch, and then rotate the pulley (must be turned) to make the feeder move forward and backward several times.
The machine rotates the pulley to lower the lower position of the Zui, that is, the filling adjustment nut abuts the body, adjusts the upper and lower nuts, so that the half head of the lower punching lever is tightly attached to the upper end surface of the adjusting nut, and the upper and lower nuts can be tightly used. Only the momentary jog is allowed to make the machine slightly reverse, otherwise the machine will be damaged.
In use, the machine for pressing the granular material into a tablet by a pressure roller, with the continuous development of the preparation, is made into a special sheet of a double layer, a three layer, a core, etc. due to the requirements of the compound preparation and the time release preparation. These need to be done on a special tablet press.
The basket type tablet press is suitable for small batch production, laboratory, hospital and other departments to suppress tablets, coal, sugar tablets, calcium tablets, coffee tablets, powder metallurgy, electronic originals and various agricultural fertilizer tablets, etc., must be inspected before use. Whether the die has quality problems such as missing edges, cracks, deformation, etc., check whether the various devices of the machine are in good condition.