Introduction of the characteristics of the oil bottle sealing machine

The oil bottle sealing machine can be divided into two parts: the control box and the output induction head. The 100KHz high-frequency current generated by the microcomputer controlled oscillation source is amplified and shaped, and the power module is driven to the induction head. When the metal aluminum foil is close to the induction head, The eddy current is generated on the aluminum foil to generate heat, and the degree of heat generation is determined by the strength of the eddy current and the length of the action time. The oil bottle sealing machine is equipped with an automatic frequency stabilization circuit, adjustable action time and working status display. Considering the convenience of the user and the small power of the whole machine, the sensor head does not take water cooling measures. Therefore, the circuit should be heated once, and should wait for one time. The waiting time is automatically adjusted according to the heating condition of the sensor head.
The oil bottle sealing machine adopts microcomputer control mode, electronic memory function, adjustable power, touch panel, comfortable hand, simple setting, beautiful and practical, imported high-power IGBT power module output, overload protection function, when the package is loaded with items On the conveyor belt, the sealing portion of the bag is automatically fed between the two sealing tapes in operation and brought into the heating zone. The heat of the heating block is transferred to the sealing portion of the bag through the sealing tape, so that the film is heated and melted, and then the film is heated and melted. Through the cooling zone, the surface temperature of the film is appropriately lowered, and then rolled by the knurling wheel, the oil bottle sealing machine bonds the upper and lower plastic films of the sealing part and presses the mesh pattern, and then is sealed by the guiding rubber belt and the conveyor belt. The bag is sent out of the machine to complete the sealing operation.

Pain Relief Patch(Pain Areas)

Pain Relief Patch
[Name] Medical Cold Patch
[Package Dimension] 6cm×8cm 4pieces/box
The pain relief patch is composed of three layers, namely, backing lining, middle gel and protective film. It is free from pharmacological, immunological or metabolic ingredients.
[Scope of Application]
For cold physiotherapy, closed soft tissue only.
[Indications]
The patches give fast acting pain relief for strains, sprains, cramp, bruises, swollen areas or joint stiffness.
[How To Use a Patch]
Please follow the Schematic Diagram. One piece, one time.
The curing effect of each piece can last for 6-8 hours.
[Attention]
Do not apply the patch on the problematic skin, such as wounds, eczema, dermatitis,or in the eyes. People allergic to herbs and the pregnant are advised not to use the medication. If swelling or irritation occurs, please stop using and if any of these effects persist or worsen.notify your doctor or pharmacist promptly. Children using the patch must be supervised by adults.
[Storage Conditions]
Store below 30c in a dry place away from heat and direct sunlight.







Pain Relief Patch(Pain Areas),Shouler Pain Relief Patch,Joints Pain Relief Patch, Muscle Pain Relief Patch

Shandong XiJieYiTong International Trade Co.,Ltd. , https://www.xijieyitongpatches.com