Dicer machine use precautions and daily maintenance methods
Note on the use of dicing machine:
Crushed chili refers to dried red chili peppers that have been crushed or ground into small, coarse flakes. These flakes are commonly used as a spice to add heat and flavor to a variety of dishes. The level of spiciness can vary depending on the type of chili peppers used and whether the seeds are included. Crushed chili is a popular ingredient in many cuisines around the world, including Mexican, Italian, and Asian cuisines. It is often sprinkled on pizzas, pasta, soups, stews, and various other dishes to enhance their taste and provide a fiery kick. Additionally, crushed chili can be a key component in spice blends and rubs for meat or vegetable preparations.
Crushed chili is a fiery and versatile spice made by crushing or grinding dried chili peppers into coarse flakes. This form of chili offers a spectrum of heat levels, depending on the type of peppers used and whether seeds are included.
Known for its ability to add both heat and flavor, crushed chili is a popular choice in various cuisines worldwide, including Mexican, Italian, and Asian dishes. It serves as a go-to spice for sprinkling over pizzas, pasta, soups, stews, and a myriad of other culinary creations to elevate their taste with a fiery punch.
Its coarse texture and intense heat make crushed chili an ideal addition to spice blends, marinades, and rubs for meats or vegetables. Whether used sparingly for a touch of warmth or generously for a spicy kick, crushed chili brings a distinctive zest to dishes, making it a staple in many kitchens seeking to amplify flavor with a hint of heat.
Chili Crushed, Chili flakes, Crushed Chili, Red Chili Flakes Henan Sunny Foodstuff Co.,Ltd. , https://www.hnsunnyfood.com
1. Ensure that the components are good overall. During the operation, ensure that each part of the instrument is locked and not loose. If it is loose, not only can not cut the satisfactory slice, but also damage the instrument; ensure a certain angle of the slice. After adjusting the optimal angle of the microtome, try not to arbitrarily adjust the angle, otherwise it is difficult to cut out the ideal slice or jump phenomenon.
2. Move the tool holder and the parts on the tool holder as little as possible. Because they are fixed together by fixed karting, if you move frequently, it will cause wear between the card and the card slot, which is easy to loose or the card is not strong, which makes the slicing difficult.
3. Keep the microtome clean. After each use, thoroughly clean the wax and wax on the microtome, and then wipe the surface with oil to avoid cross-contamination and affect the life of the tool holder.
4, to ensure the indoor environment is dry and clean, each precision instrument has its own environment and air pH conditions, if the air is relatively humid, the instrument will easily rust, generate oxide film and other phenomena, and each time using the slicer It is necessary to use ice cubes to freeze the wax block, and there is warm water bleaching tablets next to the slicer, which will affect the air humidity. Therefore, when slicing, it should be equipped with a drying instrument or air conditioner to dehumidify.
Daily maintenance of dicing machine
Before using the dicing machine every day, carefully check whether the parts of the microtome are normal. After use, the parts are adjusted to the original position. It is necessary to pay attention to the steps to switch on the machine and find that the abnormality is maintained and repaired as soon as possible, so as to avoid the development of the instrument failure. For instrument failure, we should carefully observe and analyze, try to eliminate the simple faults yourself. For complex faults, please ask professional maintenance personnel, and make maintenance records when engineers are repairing, sum up experience, in order to facilitate better maintenance of the instrument in the future. service.