Semi-dry squid fillet processing method
Solar Camera,Wireless Solar Outdoor Monitoring,Night Vision Solar Camera,Solar Security Camera Shenzhen Zuomi Technology Co., Ltd. , https://www.zuomicamera.com
1. Raw material selection: Fresh frozen squid is selected as the raw material, and only the torso part of the squid, head fins, epidermis, and internal organs are used for other purposes.
2. Thawing: Thawing by air bubbling, until the individual can separate, the fish can be in semi-thawed state.
3, cutting: first remove the caudal fin, cut straight from the back with a knife, and then even the headband viscera pulled out, separated and placed alone.
4, peeling: hand peeling, do not pollute the ink, and then repeatedly washed with water.
5, hot cooking: After the peeled squid slices put 80 °C ~ 90 °C hot water, cook until it can be torn until.
6. Cooling: The cooked bream fillet is soaked in running water and cooled to remove residual film and skin. Do not expose to the air to prevent yellowing of the carcass surface.
7, seasoning: sugar, salt, monosodium glutamate and glacial acetic acid, according to the need to mix with the carp carcass fully mix. Then, the carp carcass was straightened and stretched. The layers were stacked and soaked for more than 6 hours.
8. Drying: Use three-level drying at 45°C, 40°C, and 3°C, bake until the moisture content is about 40%, and unwind the cold room after blowing it out for half an hour.
9. Packing: Each piece of eel is scrubbed with acetic acid and salt mixture, sorted and packaged, and refrigerated at -18°C.