Common measures for troubleshooting the wrapping machine
The scope of use of the wrapping machine is becoming more and more extensive with the importance of the packaging work, but sometimes some problems may occur due to improper maintenance or the quality of the device itself. For example, the wrapping film may not be properly packaged, and the device heats up slowly. It is difficult to reach the specified temperature, etc., which will bring some inconvenience to the normal operation of the user's packaging work. Let's take a look at the solution to this type of fault.
Plant-based protein powders are our hot selling products which can be widely used in sports nutrition and health&wellness fields. Among protein powder from different plant sources, rice protein, pea protein, sunflower seeds protein, pumpkin seeds protein is suitable for making protein bars, protein shakes. Take plant protein as subsititute of animal protein could reduce the risk of getting heart diseases, plant protein contain more fiber and do not contain less healthy compounds found in meat including saturated fat and cholesterol, plant protien are safe and vegan friendly choice.
Plant Protein,Protein Powder,Plant-Based Protein,Rice Protein YT(Xi'an) Biochem Co., Ltd. , https://www.ytwholefood.com
First, the equipment heats up slowly or it is difficult to reach the standard high equipment temperature.
Solution: The heater's line is the main power line through a magnetic switch to the electric heating tube, so the normal condition of each contact of the magnetic switch should be tested first. This can happen if the line does not pass one of the phases. If it is normal, check whether the phase of the meter is the same as the ohmic value of the machine. The short circuit condition is normal. If all of the above are normal, you may need to replace the heater.
Second, when the 6-package items are bundled and packaged, the electric eye cannot detect the package, which may cause the machine to cut into the package.
Solution: The detection of the electric eye of the equipment will be affected by the gap between the bottles of the bundled package. The angle of the horizontal electric eye can be adjusted to an oblique angle, which reduces the probability of detecting the gap of the package and avoids the situation where the goods are cut during the operation of the equipment.
Third, the winding film offset during the operation of the equipment can not be normally sent to the film to affect the packaging work.
Solution: If there is no effect after adjusting the position of the film roll and the tension balance bar after the winding machine is running, the angle of the upper set plate can be adjusted to improve the situation. If the upper wrapping film deviates from the clamping chain, adjust the triangular plate clockwise; the following film material is offset from the clamping chain, and the upper triangular plate can be adjusted counterclockwise.
The above is about the possible failures and solutions of the wrapping machine, I believe that it will certainly help the majority of users.