Highly Activity Fungal Alpha-Amylase Enzyme for Sugar Production with Wholesale
Car Blanket is also called as auto blanket, as it is normally used for keeping warm in the car.
As a result, it is normally used in the open air. When people go out for a picnic and want to have a snap in the daylight or even spend the whole night outside, then the car blanket would be a best choice for you.
It uses 12V voltage, rather than AC power.
You just need to plug it into cigarette lighter of your car, and it the blanket will keep you warm.
Below image as a reference:
Car Blanket Car Blankets, Heated Car Blanket, Car Electric Blanket, Car Heating Blanket Ningbo Makeheat Electrical Appliance Co., Ltd , http://www.makeheat.net
Fungal Alpha-Amylase FAA-280 is made from Non-GMO strains of Aspergillus oryzae by submerged fermentation and refining extraction process. It can be used for starch liquefaction and also saccharification to produce maltose and glucose. As an endoamylase , FAA-280 can rapidly hydrolyze the interior α-1, 4 glucosidic linkages of gelatinized starch, amylose and amylopectin solution and produce soluble dextrin and a small quantity of glucose and maltose. It can also produce syrups of high maltose and a small quantity of glucose if the reaction lasts for longer time.
The optimum pH range of this product is 4.8 to 5.4 and starch can be effectively hydrolyzed at pH range 4.0 to 6.6. If the stability of enzyme is emphasized, the reaction should be conducted at pH above 5.5. If the reaction rate is emphasized, the pH should be below 5.5. See Figure 1.
Effect of Temp
Optimum temperature range is 45 to 55°C and effective temperature range is 45 to 65°C.
Optimum temperature of this product is 50°C. It can efficiently hydrolyze starch at a temperature range of 45 to 55°C. If the content of starch is higher, the reaction temperature can be raised to 65°C. The optimum temperature range is affected by pH, within 45 to 65°C. See Figure 2.
Â
Â
In general, the dosage rate depends on the desirable maltose content of the final syrup and the saccharification time. The typical dosage rate of FAA-280 is in the range of 0.1 to 0.5kg/TDS.
Inactivation
Inactivation of FAA-280 can be achieved by raising the temperature to the range of 90 to 100°C and maintaining for approximately 5 to 10 minutes. If the content of starch is higher, this product can be inactivated by keeping the temperature at 80°C for about 30 minutes, or 70°C for about 60 minutes. If inactivation by high temperature is not desirable, another option of inactivation is to decrease the pH below 4.0. Inactivation can also be realized by adjusting pH and temperature at the same time.
Inhibitors
This product may be inhibited by several heavy metal ions. Copper and lead ions are strong inhibitors. Inhibitive effects may also be achieved if the content of zinc, nickel and iron ions are high.
Â
Fungal Alpha-Amylase FAA-280 is made from Non-GMO strains of Aspergillus oryzae by submerged fermentation and refining extraction process. It can be used for starch liquefaction and also saccharification to produce maltose and glucose. As an endoamylase , FAA-280 can rapidly hydrolyze the interior α-1, 4 glucosidic linkages of gelatinized starch, amylose and amylopectin solution and produce soluble dextrin and a small quantity of glucose and maltose. It can also produce syrups of high maltose and a small quantity of glucose if the reaction lasts for longer time.
The optimum pH range of this product is 4.8 to 5.4 and starch can be effectively hydrolyzed at pH range 4.0 to 6.6. If the stability of enzyme is emphasized, the reaction should be conducted at pH above 5.5. If the reaction rate is emphasized, the pH should be below 5.5. See Figure 1.
Effect of Temp
Optimum temperature range is 45 to 55°C and effective temperature range is 45 to 65°C.
Optimum temperature of this product is 50°C. It can efficiently hydrolyze starch at a temperature range of 45 to 55°C. If the content of starch is higher, the reaction temperature can be raised to 65°C. The optimum temperature range is affected by pH, within 45 to 65°C. See Figure 2.
Â
Â
In general, the dosage rate depends on the desirable maltose content of the final syrup and the saccharification time. The typical dosage rate of FAA-280 is in the range of 0.1 to 0.5kg/TDS.
Inactivation
Inactivation of FAA-280 can be achieved by raising the temperature to the range of 90 to 100°C and maintaining for approximately 5 to 10 minutes. If the content of starch is higher, this product can be inactivated by keeping the temperature at 80°C for about 30 minutes, or 70°C for about 60 minutes. If inactivation by high temperature is not desirable, another option of inactivation is to decrease the pH below 4.0. Inactivation can also be realized by adjusting pH and temperature at the same time.
Inhibitors
This product may be inhibited by several heavy metal ions. Copper and lead ions are strong inhibitors. Inhibitive effects may also be achieved if the content of zinc, nickel and iron ions are high.
Â
