Mechanized tillage safety operation technology
Amino acid are organic acids containing amino groups, which are the basic units of proteins. There are more than 20 kinds of amino acids that constitute proteins, which are often divided into essential amino acids and non-essential amino acids according to their nutritional needs for pigs and chickens. In pigs, chickens can not be synthesized, or can be synthesized, but the speed and quantity of synthesis can not meet its normal growth needs, so must be supplied by the outside world of amino acids, called essential amino acids. So far, the essential amino acids that have been widely used in the breeding industry are methionine and lysine
Efficacy and function of amino acid for Poultry and veterinary use:
First, Feed Amino Acid improve immunity
Amino acids are important nutrients in animals, which can improve the immunity of animals
Second, promote growth and development
Amino acids also have a positive effect on the growth and development of domesticated animals
Third, improve the efficiency of breeding
There is a certain relationship between animal amino acid intake and feed conversion rate. Reasonable strengthening of amino acid supply can improve feed utilization rate, reduce pollutant discharge and improve aquaculture efficiency
Amino Acid, amino acid feed, Amino Feed,Amino Acid For Poultry,amino acids poultry NANYANG CHENGPENG PHARMACEUTICAL CO.,LTD , https://www.cpbiopharmacy.com
2. The adjustment of the cultivating depth of the walking tractor is controlled by the tail wheel or skid (used during hydroponic). Loosen the pinch handle on the tail wheel seat and move the outer tube of the tail wheel up and down to adjust the position of the tail wheel in a larger range. In general, the handle can be rotated to adjust the depth of cultivation. The use of the outer tube should be as appropriate as possible, and then use the handle to make a small amount of adjustment.
3, plowing should pay attention to the direction of cultivation, as far as possible in the field to leave only a large ridge or furrow. Plows should be avoided as much as possible for long periods of overload to prevent deformation of the pallet.
4, in the dragging tillage machine, the two ends of the universal joint work should be close to the level. When the universal joint is raised in working condition, the rotation speed should be slowed down, and the lifting height should be limited so that the angle between two ends of the universal joint does not exceed 30.
5. When working, after the cultivator and the machine are forbidden to stand in order to prevent accidents.
6. Farm implements driven by tractors require the driver to pay special attention to vigilance and be ready to cut off power to avoid accidents.
7. When parking, the tiller should land on the ground and must not be hung and parked.