Emergency stop for sudden failure of brake during driving of agricultural locomotive

When a farm hand is driving a farm locomotive, it should try to stop it as soon as possible according to the road conditions. If it is found that there is an obstruction in front of the vehicle that is in urgent need of evacuation and the situation is urgent, the agricultural hand should quickly brake by hand, and the vehicle should be decelerated by intermittent braking that is performed several times by tightening and releasing. Do not pull too hard one time, otherwise it will cause the hand brake wire rope because of too much force and broken, so that the hand brake failure, or the vehicle's rear wheel lock to make the vehicle out of control. At the same time, grab the low gear and make full use of the engine's restraining force to slow down the vehicle and hold the steering wheel. Based on the principle of "giving people first and letting things go" to avoid dangerous targets, they head for the roadside and stop safely. If the agricultural locomotive finds that the brake is malfunctioning during normal driving, there is no special situation in front of it. You can decelerate it first, then switch back to the low gear, observe the surrounding conditions, and make the best use of the road surface, uphill, road bank, and sand mud dump with large resistance. Wait for the car to stop slowly. If the situation is very urgent, for example, when there is a brake failure on dangerous sections such as downhill, cornering, etc., to prevent the further expansion of the danger, it is necessary to pay attention to the control of the direction when the handle brakes or grabs the low gear. As a last resort, Resolutely use roadside sand, silt piles, haystacks, road trenches, woods, big trees, rocks, and other obstacles to stop vehicles from driving.

CAD CAM Dental Milling Machine

CAD/CAM dental systems refers to the software used to both design and mill dental prosthetics. CAD (Computer Aided Design) includes digitally scanning, while CAM (Computer Aided Manufacturing) is the process of sending final models to the output device and manufacturing them through milling or 3D printing. DGSHAPE devices and software are specifically engineered to perfectly fit into this digital workflow.
Demetdent CAD/CAM Dental Milling Machines were built with you in mind. Built-to-last and designed for the simplified set-up and milling of a wide-range of dental prosthetic materials, make milling more comfortable and convenient for lab technicians. In addition, Demetdent dental milling machines offer industry best warranties and a legendary level of dealer support, customer service and technical support.

Cad Cam Milling,Cad Milling Machine,Cad Cam Dental Machine Price,Dental Cad Cam Cnc Milling Machine

Shandong Carved Intelligent Technology Group Co.,Ltd , https://www.demetdent.com