Working principle and application of hot filling three-in-one machine

First, an overview of the hot filling three-in-one machine

The stainless steel body is used, and the lower cup, the lid, and the seal are all completed at one time. The machine mainly uses cups, boxes, bowls of milk, yogurt, instant noodles, lotus root starch, rice noodles and other food and beverage filling and capping, and can also be used for other special-shaped closures. Automatic cup, automatic cover, automatic sealing, automatic cupping; imported stepless speed change system, can adjust production speed; use cam indexer to make the lower film positioning accurate, the machine runs smoothly; the cover and seal are completed at the same time, the lower film Movement has no effect on the positioning accuracy of the cover film.

Second, the working principle of hot filling three-in-one machine

Check the sealing surface with the air source, adjust the air pressure to 0.3~0.4MPa to adjust the oil intake. After a general operation, spray a drop of oil several times, and check the fuel injection regularly. Anti-drip filling system: When the filling is done, the cylinder moves up and down to drive the bulkhead. When the cylinder moves upwards, the head is up, that is, the valve is opened, and the material is started to be filled. When the cleaning is finished, the control valve is closed, the motor stops rotating, the system returns to its initial state, and the next process begins.

Third, the application of hot filling three-in-one machine

This machine is mainly used for filling beverages. The machine combines the functions of washing, filling and capping on one body, and realizes the whole process of automation. It is suitable for polyester bottles, plastic bottle filling beverages, mineral water, pure water, heating temperature control device and hot filling. Installed. The trial bottle type adjustment of each part is realized by the rotation of the handle, which is easy and convenient, simple and quick. The filling method adopts a new type of micro-pressure filling, which makes the filling speed faster and more stable, so the machine has higher output and more benefit than the machine of the same specification. This machine adopts advanced programmable controller to control the automatic operation of the machine. The inlet chain is air-driven, and cooperates with the host inverter to make the bottle running more stable and reliable. Photoelectric detection of the operation of each component, so the degree of automation is high, easy to operate. On this basis, the machine can change the filling equipment to form a low vacuum filling method.